Uni-Hydro 56 Ton (5624) Ironworker
In building the 5624 Chuck Dvorak took up his own challenge to design a 1/2” x 24” flat bar shear that could achieve virtually perfect shearing, with a blade rake as close to zero degrees as possible. The result was the Uni-Hydro Model 5624, featuring a 2 degree low rake blade and the highest quality shear for any hydraulic ironworker that has ever been produced. No other hydraulic ironworker can match the 5624’s capability of shearing 1/2” x 24” on 2 degrees of rake, with such minimal distortion over 24”. This machine will do great in small fab, farm and sheet metal shops.
FEATURES:
Manual Punch Aligner
9″ Open Throat Punch with 56-ton capability
24″ Bar Shear with Four Sided Blades, with 2 degrees of rake
Bar Shear Hold-Down can be Fixed or Adjustable
Full Up & Down Stroke Control
Built for Forklift Handling
Magnetic Starter for Safety & Reliability
1 Phase or 3 Phase Motor
* Shown with optional Slug Type Angle Shear
Specifications
Model 5624
Tonnage 56
Throat Depth 9"
Punch
1-3/8" hole in 1/2" mild steel
2-1/4" hole in 5/16" mild steel
Bar Shear
1/2" x 24"
Angle Shear 90°
Slug Type - 6" x 6" x 3/8"
Sever Cut - 4" x 4" x 3/8"
Miter Angle 45°
Bar Shear - 4" x 4" x 3/8"
Slug Type - 4" x 4" x 3/8"
Rod Shear
Round (Max) - 1-1/4"
Square (Max) - 1-1/4”
V Coper Notcher 90°
For 4" x 4" x 3/8" Angle Iron
Square Notcher
3" x 3" x 3/8" - Punch/Power Cavity
Pipe Notcher (Sch 40 or 80)
1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4”, 2"
Brake
6", 9”, 14”, 18”, 24” capacity
Channel Shear
2" & 3" combined or 4" standard
Strokes Per Min
Light Material - 50
Max Capacity - 9
Hydraulics 2,000 psi
Oil Capacity 16 gallons
Motor
Standard - 5 HP/ 220v / 3ph
Optional - 5 HP / 1ph
Dimensions
(L x W x H) 46" x 37" x 70"
Bar Shear Work Height - 29"
Punch Table Top Height - 39-1/4"
Cavity Table Top Height - 41"
Weight - 2,700 lbs
STATION TOOLING OPTIONS:
V-COPER NOTCHER
SQUARE NOTCHER
SLUG TYPE ANGLE SHEAR
2-PART BRAKE
UNIVERSAL SEVER HOUSING
PIPE NOTCHER
SEVER PLATES
SEVER HOUSING BACK
SPRING RETURN BRAKE
OPTIONAL ACCESSORIES:
STEEL BIN CATCHER
DELUXE BACK GAUGE
PUNCH TABLE + ADJUSTABLE JIG
BAR SHEAR TABLE
BAR SHEAR STOP
REMOTE FOOT SWITCH
GREASE BANK
OFFSET DIE STANDS
OVERSIZE DIE STAND
OVERSIZE DIE STANDS
OVERSIZE PUNCHES
PUNCH RACK
SPECIAL DIE STAND
PUNCH NUT WRENCHES
NEED MORE INFO? CONTACT US TODAY FOR MORE INFORMATION ABOUT UNI-HYDRO IRONWORKERS!
Visit the Uni-Hydro website @ www.unihydro.com
Norcal Machinery is the master distributor for Uni-Hydro machinery for the West Coast states of CA, AZ, NV, OR, WA, ID and UT.