ShopSabre IS 510 3-Axis CNC Router
Used ShopSabre IS 510 CNC Router, 3-Axis, 75” x 125” Table, 24,000 RPM, 10 HP, 10 Position Tool Holder
Make - ShopSabre
Model - IS 510
Type - CNC Router
Condition - Used
Serial Number - 8257
Year - 2016
SPECIFICATIONS:
Number of Axis 3
Table Width 60"
Table Length 120"
Gantry clearance: 12″
Z travel 16”
MAX RPM 24,000 RPM
Table Hold Down
Vacuum (4-Zone) & "T" Slot Hold Down
Spindle Mfg HSD 915A Spindle
Spindle Motor 10 HP Auto Tool Changing Spindle
Tool Changer (10) Position Auto Tool Changer (ER32 Collets)
Drives Digital Brushless A/C Digital Servo Motors W/Amplifiers
Pop-up Pins Industrial Pop-Up Table Reference Pins (3 on Left / 2 Along Front)
Tool Measure Switch Measures Tooling Height w/out Changing Z Height
Control ShopSabre Computer System (on ShopSabre Roll Around Stand)
Software Vectric Vcarve Pro CAD/CAM Software
Maximum travel speeds on x & y: 2100 IPM with Servo System
Maximum travel speeds on z: 1500 IPM with Servo/Air Balancer System
Table bed cut area: 75" X 125" X 12" (Pins/Vacuum Options Designed for 5×10 sheets)
EQUIPPED WITH:
Controller: ShopSabre
Machine structure: Welded Over-Sized Steel Tube Frame
Gantry structure: OverSized Tube Steel Bridge w/ Cold Rolled Plate & Tube Uprights
Bearing system: 25MM Linear Guide Rails and Bearings with Quad Roller Sets and Triple Seal by THK/HiWnn
PC System:Included with SSD Hard Drive and PCI Controller Board Installed
** Does not come with dust collector system, just ducting below, per photos
Machine foot print (including gantry): 97" X 156" X 98"
Machine weight: 4000 lbs
Terms & Conditions:
FOB Fremont, USA. Immediate Availability. Full Payment Due Prior to Shipment via Wire Transfer, Subject to Prior Sale. “As-Is, Where-Is” off seller’s floor. Buyer responsible for removal.
INV#: NM-220599
DISCLAIMER: The information presented in the write ups and the photographic representations of machine tools on this page are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Assume any tooling depicted in photos, is not included with the purchase. Price and information presented in the write ups on the web site are subject to change without notice. Norcal Machinery claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.